MandHTires.com

RPM OUTLET - WE TAKE THE GUESSWORK OUT OF PERFORMANCE PARTS! ®

Race tires you can count on by the pioneers of drag tire manufacturers.

M & H Drag Slicks/Radials are designed, engineered, and built for outstanding performance, run after run. Built using the latest in high-tech construction techniques and years of drag racing experience in compound development

M & H Drag Slicks/Radials feature state-of-the-art compounds for a bigger contact patch. The special rubber compound requires less heat than other brands, resulting in better traction and faster times. Plus, you'll have fewer burnouts and a longer tire life. And because they use more air pressure than other slicks, they're safer at higher speeds.

15" Drag Slick Tires

17" Drag Radial Tires

15/ 17" Front Runners

Click-On Link For More Info.

M&H Racemaster® Drag slicks

Real world research and development give M&H Racemaster® slicks the edge over competitive brands.

Engineered for maximum traction and consistent ET's with superior construction and compounding for nearly every drag race application. M&H Racemaster® Drag Slicks use the latest in high-tech construction techniques developed from years of drag racing experience in compound development, the M&H Racemaster Drag Slicks will get your car down the track in record time.

M&H Racemaster® Feature :

Wrinkle Wall Design
Compounded For Maximum Traction
Requires Little or No Burnout
Engineered For Consistent Performance

Acceptable practice for rim width is tread width plus or minus 1''

M&H® Drag Slick Stats:
This drag slick has 2 narrow torque grooves for improved performance.

Note : Tires are sold only as pairs and must match within 1/2'' of roll out.

M&H Racemaster® 15" Drag Slick Tires
Part #	Size	Size Equivalent	Price
MNH-MHR-50	10.5/28.0-15	28.0 X 10.5-15	$ 169.99
MNH-MHR-52	10.5/28.5-15	28.5 X 10.5-15	$ 169.99
*Click-On Price to Order*

PART #	SIZE	COMPOUND	APPROX. WEIGHT	MEASURING RIM	SIZE EQUIVALENT	SIDEWALL WIDTH	TREAD WIDTH	OVERALL DIAMETER	CIRCUMFERENCE
MHR-50†	10.5/28.0-15	#704	23	10.0	10.5/28.0-15	11.2	10.5	28.0	88.0
MHR-52†	10.5/28.5-15	#704	25	10.0	10.5/28.5-15	12.1	10.5	28.5	91.1

† Estimated Specifications

WARNING: M&H® Drag Slick tires have reduced tread depth and compounds designed for drag racing. Due to the reduced tread depth these tires should be used on dry pavement only and are not suitable for highway use!

M&H Racemaster® Drag Radial Tires

M&H Racemaster®'s legendary race tire technology comes to the street with all-new M&H Drag Radials.

Built using the latest in high tech radial construction techniques and years of drag racing experience and compound development, this D.O.T. approved street legal drag radial will get your car down the track in record time and drive you home with sure handling and an excellent ride.

M&H Racemaster® Drag Radials Feature :

Soft Compound, Superior Traction On The Drag Strip
Radial Construction, Excellent Ride Control on the Street
Low Void, Directional Tread for Maximum Dry Traction
Tubeless

Acceptable practice for rim width is tread width plus or minus 1''

CAUTION: It is not recommended that radial and non-radial tires be mixed on the same vehicle.

M&H® Drag Radial Stats:
DOT Certified, Tubeless, Comparable Race Sizes listed below

Note : Tires are sold only as pairs and must match within 1/2'' of roll out.

M&H Racemaster® 17" Drag Radials
Part #	Size	Size Equivalent	Price
MNH-ROD-04R	325/45R15	10.5/28.0R15	$ 175.50
MNH-ROD-06R	275/50R17	9.0/28.0R17	$ 249.50
MNH-ROD-05R	325/45R17	10.5/28.0R17	$ 248.50
MNH-ROD-09R	390/40R17	12.0/29.5R17	$ 275.50
MNH-ROD-13R	275/45R18	9.0/28.0R18	$ 268.50
MNH-ROD-14R	325/40R18	10.0/28.0R18	$ 288.50
MNH-ROD-15R	345/35R18	12.0/28.0R17	$ 315.50
*Click-On Price to Order*

PART #	SIZE	COMPOUND	APPROX. WEIGHT	MEASURING RIM	SIZE EQUIVALENT	SECTION WIDTH	TREAD WIDTH	OVERALL DIAMETER	CIRCUMFERENCE
ROD-06R†	325/45R17	R508	28	8.0/10.0	9.0/28.0R17	10.1	8.8	28.0	88.0
ROD-05R†	325/45R17	R508	31	9.0/11.0	10.5/28.0R17	12.1	10.3	28.0	88.0
ROD-09R†	390/40R17	R508	33	10.0/12.0	12.0/29.5R17	14.3	12.5	29.5	92.7
ROD-13R†	275/45R18	R508	31	8.0/10.0	9.0/28.0R18	9.8	8.8	28.0	88.0
ROD-14R†	325/40R18	R508	32	9.0/11.0	10.5/28.0R18	11.3	10.3	28.0	88.0
ROD-15R†	345/35R18	R508	32	10.0/12.0	12.0/28.0R18	13.3	12.1	28.0	88.0

† Estimated Specifications

WARNING: M&H Racemaster Drag Radials tires have passed D.O.T. requirements but have reduced tread depth and compounds designed for racing. Due to the reduced tread depth these tires should be used on dry pavement only and are not suitable for normal highway use!

M&H Racemaster® Front Runners / Skinnies

M&H Racemaster® Front Runners Feature :

Ultra-Lightweight Design Reduces Rolling Resistance
Acceptable For High Speed Use
Tubeless Construction
Available in the Popular 15/17" Sizes

Acceptable practice for rim width is tread width plus or minus 1''

CAUTION: It is not recommended that radial and non-radial tires be mixed on the same vehicle.

M&H® Front Runner Stats:
Note : Tires are sold only as pairs and must match within 1/2'' of roll out.

M&H Racemaster® 15/17" Front Runners
Part #	Size	Size Equivalent	Price
MNH-ROD-02R (Radial)	185/55R15	185/55R15	$ 139.99
MNH-ROD-11R (Radial)	185/55R17	185/55R17	$ 139.99
MNH-MSS-014 (Non-radial)	185/85-15	4.5/27-15	$ 129.99
MNH-MSS-016 (Non-radial)	185/80-15	4.5/28-15	$ 99.99
MNH-MSS-017 (Non-radial)	4.5/26.0-17	4.5/26.0-17	$ 139.99
*Click-On Price to Order*

PART #	SIZE	COMPOUND	APPROX. WEIGHT	MEASURING RIM	TIRE DESIGN	SECTION WIDTH	TREAD WIDTH	OVERALL DIAMETER	CIRCUMFERENCE
ROD-02R†	185/55R15	R02R	6.0	4.0	Radial	6.7	5.0	26.0	81.7
ROD-11R†	185/55R17	R11R	6.0	4.0	Radial	6.6	5.0	26.0	81.7
MSS-014†	185/85-15	BP	6.2	4.0	4.5/27-15	7.0	4.5	27.0	85.6
MSS-014†	175/75-15	BP	5.1	4.0	4.5/26-15	6.5	4.5	26.0	81.2
MSS-017†	4.5/26.0-17	R11R	4.5	4.0	non-Radial	6.0	5.0	26.0	81.2