|
Simply mouseover and click on vehicle application or specific power option link for your vehicle.
|
DYNO PROVEN KITS PROVIDE THE LARGEST POWER GAINS FOR YOUR 1996-04 MUSTANG GT/BULLETT
|
|
|
STRATEGY
In keeping with our goal of providing our customers with the best possible value, we have tested a large group of components specifically designed for your 1996-04 Mustang GT/Bullet.
We have invested many hours evaluating and refining each of the products on our chassis “dyno”, to ensure that we could develop as much power as possible, as safely as possible.
End result is our now available "Dyno Tuned Options".
Our site menu on the left side of this page, lists the clear winners when it comes to “performance vs. dollar” value. Please check back often as we are always developing new ways to create more horsepower.
| |
 |
 GEN X Performance Radiator Hose Kit
Designed for use on 1996-04 Mustang GT 2V application
 |
MotoBlue Performance Radiator Hose Kit is exceptionally durable and resistant to pressure extremes.
Made from a premium EPDM rubber compound that protects against the high temperatures of full-throttle driving.
MotoBlue Performance Radiator Hose Kit will prolong the effectiveness of coolant because it is 10-15 times more resistant to water permeation than silicone hose. Upper and lower radiator hose included.
Features : Upper Lower Radiator Hose KitMade from EPDM silicone rubber compound
P/N # MTB460156 $ 49.50
|
 GEN X Water Pump Pulley
Designed for use with SHORT STYLE water pump
 |
Free Up Extra Horsepower with the MOTOBLUE 22% billet aluminum pulley!
Replace your factory high drag steel water pump pulley with a MOTOBLUE 22% under drive billet aluminum water
pump pulley. The MOTOBLUE Water pump pulley is designed to free up extra horsepower by reducing the amount of
water drag at high RPM’s, adds 4.2 HP and 6.1 Ft-Lb of torque. Installation time is 10 minuets, and is available for same day shipping.
Features : Billet Aluminum underdrive pulley Adds 4.2 HP and 6.1 Ft-Lb of torque.
P/N # MTB460155 $ 40.00
|
 160° / 180° Low-Temperature Thermostat
|
A Hypertech PowerStat low-temp thermostat improves performance
in two ways: first by increasing the mass flow rate of intake
air, and second by reducing the engine's tendency to detonate.
From the laws of physics, cooler air is denser than
warmer air. Since horsepower increases as the amount of air
and fuel burned increases, cooler air (with more air molecules
per cubic inch) makes more power. The
PowerStat allows the engine to cool down to a lower temperature
than the factory thermostat to make more power. At the drag races, water can be sprayed
on the radiator between races to drop the temperature and improve performance. The PowerStat ensures that you leave the line at the same temperature on each run to give consistent maximum performance for bracket racing.
|
|
A lower temp T-stat reduces the temperature of both
the incoming air/fuel mixture and the surfaces of the combustion
chamber, greatly reducing the tendency to detonate. Detonation is an audible pinging / knocking
sounds, refers to the spontaneous explosion of the unburned air/fuel
mixture in the combustion chamber. Detonation reduces power, and can severely
damage an engine. A lower temp T-stat allows the engine to safely develop more horsepower.
|
|
- Increases Mass Flow Rate of Intake Air
- Allows Engine to Cool Down to Lower Temperature than Factory Thermostats
- Reduces Engine's Tendency to Detonate
- Reduces Temperature of Both the Incoming Air/Fuel Mixture and Combustion Chamber Surface
Ford 160° PowerStats
P/N HYP1011
|
1996-09, 4.6L/5.4L All Car - Truck $ 14.00 |
|
|
Ford 180° PowerStats
P/N HYP1025
|
1996-09, 4.6L/5.4L All Car - Truck $ 14.00 |
|
|
|
|
|
|