DYNO PROVEN KITS PROVIDE THE LARGEST POWER GAINS FOR YOUR 1996-04 MUSTANG GT/BULLETT
STRATEGY
In keeping with our goal of providing our customers with the best possible value, we have tested a large group of components specifically designed for your 1996-04 Mustang GT/Bullet.
We have invested many hours evaluating and refining each of the products on our chassis “dyno”, to ensure that we could develop as much power as possible, as safely as possible.
End result is our now available "Dyno Tuned Options".
Our site menu on the left side of this page, lists the clear winners when it comes to “performance vs. dollar” value. Please check back often as we are always developing new ways to create more horsepower.
Mustang Caliper Covers Designed to work with Ford 1996-04 Mustang GT V8 and All V6
Don't paint your stock brake calipers! Painting your calipers can be messy and time consuming, not to mention its kinda cheep looking. Save the time, trouble and
the appearance of your wheels with a set of American made MGP Caliper Covers. MGP Caliper Covers are maintenance free stylish look. All MGP Caliper Covers are very easy to install, and cane be remove for brake service with ease.
American Made Quality Construction! MGP makes their Caliper covers from light weight 6061-T6 Aerospace Aluminum that is formed to the caliper
for a perfect fit. All MGP Caliper Covers are powder coated for a long lasting high gloss look. Installation brackets are TIG welded in place for truble free longivity.
Installation take only a couple of minutes per wheel. It actually takes longer to remove the lug nuts from each wheel than the actual installation of the MGP Caliper Covers.
Features:
Great Custom Styling.
6061-T6 Aerospace Aluminum.
Red powder coat finish.
Reduces brake dust.
Easy install.
Fits 1994-2004 V6 & GT's with 16" or larger rims.
MGP Caliper Covers Front and Rear (red) P/N # MGP 10095 R $ 172.50
MGP Caliper Covers Front and Rear (silver) P/N # MGP 10095 S $ 172.50
Click-on Tech Button for Install Sheet
TECH Note: Installation take only a couple of minutes per wheel. It actually takes longer to remove the lug nuts from each wheel than the actual installation.
160° / 180° Low-Temperature Thermostat
A Hypertech PowerStat low-temp thermostat improves performance
in two ways: first by increasing the mass flow rate of intake
air, and second by reducing the engine's tendency to detonate.
From the laws of physics, cooler air is denser than
warmer air. Since horsepower increases as the amount of air
and fuel burned increases, cooler air (with more air molecules
per cubic inch) makes more power. The
PowerStat allows the engine to cool down to a lower temperature
than the factory thermostat to make more power. At the drag races, water can be sprayed
on the radiator between races to drop the temperature and improve performance. The PowerStat ensures that you leave the line at the same temperature on each run to give consistent maximum performance for bracket racing.
A lower temp T-stat reduces the temperature of both
the incoming air/fuel mixture and the surfaces of the combustion
chamber, greatly reducing the tendency to detonate. Detonation is an audible pinging / knocking
sounds, refers to the spontaneous explosion of the unburned air/fuel
mixture in the combustion chamber. Detonation reduces power, and can severely
damage an engine. A lower temp T-stat allows the engine to safely develop more horsepower.
Increases Mass Flow Rate of Intake Air
Allows Engine to Cool Down to Lower Temperature than Factory Thermostats
Reduces Engine's Tendency to Detonate
Reduces Temperature of Both the Incoming Air/Fuel Mixture and Combustion Chamber Surface
Purple Ice® is a high performance, synthetic, radiator coolant additive for both gasoline and diesel engines. It is formulated to reduce the surface tension of the coolant, which improves heat transfer through the cooling system while providing additional protection against rust, corrosion and erosion.
Purple Ice® prevents the formation of scale deposits in the radiator for optimum coolant flow and lubricates the seals of the water pump. It is ideal for use in straight water racing applications or in antifreeze / water mixtures.
Purple Ice® is compatible with traditional ethylene glycol antifreeze (green) and GM Dex-Cool® antifreeze coolants. Purple Ice should not be used in new radiators until anti-freeze has been cycled through the
GEN X Performance Radiator Hose Kit Designed for use on 1996-04 Mustang GT 2V application
MotoBlue Performance Radiator Hose Kit is exceptionally durable and resistant to pressure extremes.
Made from a premium EPDM rubber compound that protects against the high temperatures of full-throttle driving.
MotoBlue Performance Radiator Hose Kit will prolong the effectiveness of coolant because it is 10-15 times more resistant to water permeation than silicone hose. Upper and lower radiator hose included.
GEN X Water Pump Pulley Designed for use with SHORT STYLE water pump
Free Up Extra Horsepower with the MOTOBLUE 22% billet aluminum pulley!
Replace your factory high drag steel water pump pulley with a MOTOBLUE 22% under drive billet aluminum water
pump pulley. The MOTOBLUE Water pump pulley is designed to free up extra horsepower by reducing the amount of
water drag at high RPM’s, adds 4.2 HP and 6.1 Ft-Lb of torque. Installation time is 10 minuets, and is available for same day shipping.