|
Simply mouseover and click on vehicle application or specific power option link for your vehicle.
|
 DYNO PROVEN KITS PROVIDE THE LARGEST POWER GAINS FOR YOUR 1996-04 MUSTANG GT/BULLETT
|
|
|
STRATEGY
In keeping with our goal of providing our customers with the best possible value, we have tested a large group of components specifically designed for your 1996-04 Mustang GT/Bullet.
We have invested many hours evaluating and refining each of the products on our chassis “dyno”, to ensure that we could develop as much power as possible, as safely as possible.
End result is our now available "Dyno Tuned Options".
Our site menu on the left side of this page, lists the clear winners when it comes to “performance vs. dollar” value. Please check back often as we are always developing new ways to create more horsepower.
| |
 |
Billet Polished Aluminum Throttle Bodies & PLENUMDesigns to fit Ford 4.6L GT & (96-01) Mustang Cobra
If you want to find the true potential of your Mustang 4.6L 4 valve engine you're going
to have to feed it some air. The new ACCUFAB billet polished aluminum throttle body will completely change the way
your car feels and performs. You will not only experience a snappy throttle response and improved air induction but
you will also gain 11 additional horsepower, with additional torque and increased bottom end performance.
70mm and 75mm Throttle Bodies 4.6L 2V GT Mustang
(1996-01 Cobra 4V Listed Below)
Note: All units are designed as a direct-replacement, and require no other modifications.
|
Accufab Throttle Bodies Feature:
- Bolt-On 11+ HP In Just Minutes
- Improved Throttle Response
- Brass Stick Free T-body Blade
- Cut from billet 356 Aluminum
- State-of-The-Art CNC Machining
- Mirror Polished Finish
If you've never done it before, you can install this product with complete confidence. Installation is fast and simple taking only 15 minutes with basic hand tools.
|
AccuFab Polished (billet) 70mm Throttle Body
Ford 1999-04 Mustang 4.6L 2v- This Kit will add up to an additional 9+ HP @ 5100 RPM.
|
Part # ACC-F7046 $ 218.50
|
AccuFab Polished (billet) 75mm Throttle Body
Ford 1999-04 Mustang 4.6L 2v- This Kit will add up to an additional 11+ HP @ 5100 RPM.
|
Part # ACC-F7546 $ 218.50
|
75mm Billet PLENUM 4.6L 2V GT Mustang
(1996-01 Cobra 4V Listed Below)
Note: All units are designed as a direct-replacement, and require no other modifications.
|
Accufab 75mm Billet PLENUM Feature:
- Bolt-On 13+ HP In Just Minutes
- Improved Throttle Response
- Cut from billet 356 Aluminum
- State-of-The-Art CNC Machining
- Mirror Polished Finish
If you've never done it before, you can install this product with complete confidence. Installation is fast and simple taking only 15 minutes with basic hand tools.
|
AccuFab Polished (billet) PLENUM
Ford 1999-04 Mustang 4.6L 2v- This Kit will add up to an additional 13+ HP @ 6200 RPM.
|
Part # ACC-4.6PLENUM $ 199.95
|
70/75mm Billet Throttle Body & PLENUM Kits, 4.6L 2V GT Mustang
(1996-01 Cobra 4V Listed Below)
Note: All units are designed as a direct-replacement, and require no other modifications.
|
Accufab 70/75mm Billet T-Body & PLENUM Feature:
- Bolt-On 23+ HP In Just Minutes
- Improved Throttle Response
- Cut from billet 356 Aluminum
- State-of-The-Art CNC Machining
- Mirror Polished Finish
If you've never done it before, you can install this product with complete confidence. Installation is fast and simple taking only 15 minutes with basic hand tools.
|
AccuFab Polished (billet) T-Body & PLENUM
Ford 1999-04 Mustang 4.6L 2v- This Kit will add up to an additional 23+ HP @ 6200 RPM.
- Your Choice
- Accufab 70mm Throttle Body
- Accufab 75mm Throttle Body
- Accufab 75mm PLENUM
|
Part # ACC-F7546K $ 399.50
|
Billet Polished Aluminum Throttle BodyDesigns to fit Ford 1999-01 4.6L 4V COBRA/BULLETT and 2003-04 MACh-1
ACCUFAB Twin 60mm billet aluminum throttle body is machined to exact tolerance thus
making the throttle response ultra smooth from idle to wide open throttle. The linkage mechanism and twin
60mm butterflies are machined from virgin brass providing a precise fit and function. It also has
larger than stock sealed bearings for smooth action.
|
|
ACCUFAB Twin 60mm Throttle Body Feature:
- 4130 High strength Chrome Molly shaft.
- Ultra thin throttle plate to maximize air flow.
- CNC machined from 6061 billet aluminum.
- Stainless steel split shaft for a precise fit and longevity.
- Units are designed as a direct-replacement and require no additional modifications.
- Includes detailed instructions and all necessary installation hardware. No additional fabrication required!
Installation is fast and simple taking only 15 minutes with basic hand tools. If you've never done it before, you can install this product with complete confidence
|
AccuFab Polished (billet) T-Body & PLENUM
Ford 1999-01 Mustang COBRA/2003-04 MACh-1- This throttle body will add up to an additional 19+ HP @ 6000 RPM.
- Works With :
- Ford 1999-01 Mustang COBRA
- Ford 2003-04 MACh-1
|
Part # ACC-CTB99-01 $ 358.50
|
Billet Polished Aluminum Throttle BodyDesigns to fit Ford 1996-98 4.6L 4V COBRA
|
Accufab Throttle Bodies Feature:
- Polished CNC machined billet aluminum
- Bolt-On 10+ horsepower in just minutes
- Cut from the highest quality 356 aluminum
- 100% Polished, mirror finish
- Improved throttle response
- Units are designed as a direct-replacement and require no other modifications
Installation is fast and simple taking only 15 minutes with basic hand tools. If you've never done it before, you can install this product with complete confidence
|
AccuFab Polished (1200+cfm) Throttle Body
Ford 1996-98 Mustang COBRA- This throttle body will add up to an additional 14+ HP @ 6000 RPM.
- Single Blade, CNC Billet Aluminum Throttle Body
- Polished Finish STREET VERSION
|
Part # ACC-CTB96-98 $ 358.50
|
AccuFab Polished (1600+cfm) Throttle Body
Ford 1996-98 Mustang COBRA- This throttle body will add up to an additional 18+ HP @ 6000 RPM.
- Single Blade, CNC Billet Aluminum Throttle Body
- Polished Finish RACE VERSION
|
Part # ACC-SCTB96-98 $ 378.50
|
|
|
1996-04 MUSTANGS
AIR COLD-AIR INTAKES
Cold-Air Intake Systems
GEN II FIPK® Cold-Air Intake
Cold-Air Kits
S&B Performance Cold-Air
Polished Billet Intake PLENUM
Typhoon Intake PLENUMS
PI Intake MANIFOLD
CNC Billet Shifters 
Hurst Comp/Billet/Plus Shifter
Alum. Coolant Tank
Silicone Radiator Hoses
160º/180º T-Stats
Methanol Injection Kits
Motor Oil / Gear Fluids
Line-Loc Brake Control
TRINITY T-1000
SPECIAL FORCES Software 
LIVEWIRE Device
3.73/4.10 Gears
Dual-Friction Kit
Street-Strip Clutch Kits
Auto. Trans. Control Unit
Camshafts/Spring Kits
Xtreme Camshaft Kits
STAGE 2/3 Heads
Race Balancer Kit
Mid-Length Header Kit
Mid-Length Headers
X-Pipe Kits
Stainless X-Pipe Kits
American Thunder Kits
Wideband air/fuel meter
GaugeWorks Pods
2 1/16' Gauges
Coil-on-plugs
Direct-Fire Coil-near-Plugs
Coil-near-Plugs
Copper/Iridium Plugs 
Performance Spark Plugs
Caster-Camber Control Kit
Tubular K-Member/Coil-Overs
Frame Connectors
Drag Radials / Slicks
