DYNO PROVEN KITS PROVIDE THE LARGEST POWER GAINS FOR YOUR 1996-04 MUSTANG GT/BULLETT

	STRATEGY In keeping with our goal of providing our customers with the best possible value, we have tested a large group of components specifically designed for your 1996-04 Mustang GT/Bullet. We have invested many hours evaluating and refining each of the products on our chassis “dyno”, to ensure that we could develop as much power as possible, as safely as possible. End result is our now available "Dyno Tuned Options". Our site menu on the left side of this page, lists the clear winners when it comes to “performance vs. dollar” value. Please check back often as we are always developing new ways to create more horsepower.

Typhoon Intake PLENUM
Designed to work with the 1996-04 MUstang GT 4.6L (2V)

Does your Mustang seem like it's out of breath? Now you can stop that "wheezing" sound with ProProducts High-flow throttle body and Typhoon intake PLENUM. Made of true cut polished precision castings aluminum, ProProducts throttle bodies and PLENUMS use stock TPS and IAC to simplify installation. They also include all the necessary vacuum ports and linkage to facilitate ease of installation.

The Typhoon intake PLENUM is desinged to work with the 1996 to 2004 Mustangs 4.6 2V engines. Typhoon intake PLENUM moves over 100 CFM more air flow than the stock OEM inlet plenum. The Typhoon intake PLENUM fits under the stock Mustang hood and is compatible with up to any 75MM Mustang throttle body.

ProProducts PLENUM Feature: Polished precision casting aluminum Bolt-On 13+ horsepower in just minutes 100% Polished, mirror finish Improved throttle response Include all the necessary vacuum ports and linkage Units are designed as a direct-replacement and require no other modifications Click-on Tech Button for Install Sheet ProProducts Polished Finish PLENUM Ford 1999-04 Mustang 4.6L 2v This Kit will add up to an additional 13+ HP @ 5100 RPM. Part # PPC-54154 $ 109.50 ProProducts Satin Finish 75mm PLENUM Ford 1999-04 Mustang 4.6L 2v This Kit will add up to an additional 13+ HP @ 5100 RPM. Part # PPC-54155 $ 94.50 Engine Compartment Photo

75mm Throttle Bodies
Designed to work with the 1996-04 MUstang GT 4.6L (2V)

Does your Mustang seem like it's out of breath? Now you can stop that "wheezing" sound with ProProducts High-flow throttle body and Typhoon intake PLENUM. Made of true cut polished precision castings aluminum, ProProducts throttle bodies and PLENUMS use stock TPS and IAC to simplify installation and are a direct bolt-in replacement for all 1996 to 2004 Mustangs 4.6 2V engines.

ProProducts Throttle Bodies are made from permanent mold castings of 356 aluminum to produce a higher quality casting than conventional sand molds with reduced porosity and a better finish. The ProProducts 75mm Throttle Body is a direct bolt-in replacement and include all the necessary vacuum ports and linkage to facilitate ease of installation.

ProProducts Throttle Bodies Feature: Polished precision casting aluminum 100% Polished, mirror finish Include all the necessary vacuum ports and linkage Units are designed as a direct-replacement and require no other modifications Click-on Tech Button for Install Sheet

ProProducts Polished Finish 75mm Throttle Body Ford 1999-04 Mustang 4.6L 2v Made from permanent mold castings 356 aluminum Hand-fitted butterfly plate for ideal idle control This Kit will add up to an additional 11+ HP @ 5100 RPM.

Part # PPC-69221 $ 139.50

ProProducts Satin Finish 75mm Throttle Body Ford 1999-04 Mustang 4.6L 2v Made from permanent mold castings 356 aluminum Hand-fitted butterfly plate for ideal idle control This Kit will add up to an additional 11+ HP @ 5100 RPM.

Part # PPC-69223 $ 125.50

ProProducts Polished Finish 70mm Throttle Body Ford 1999-04 Mustang 4.6L 2v Made from permanent mold castings 356 aluminum Hand-fitted butterfly plate for ideal idle control This Kit will add up to an additional 11+ HP @ 5100 RPM.

Part # PPC-69220 $ 139.50

PRO PRODUCTS Big AIR Ugrade This Professional Products upgrade kit is designed to fit the 1996 to 2004 Mustangs 4.6 2V engines.. Provides over 100 CFM more air flow than stock. Fits under stock Mustang hood, works with stock sensors, and is compatible with all stock and aftermarket air intake Kits Featuring : 75mm Satin Finish Throttle Body 75mm Satin Finish Intake Plenum UPGRADE OPTION: *Add $25.00 for Polished Finish Throttle Body, Intake Plenum Kit Dyno Proven Gains Of Up To: 22+ hp and 21+ lb-ft Torque Increase!   Part# RPM-460961-B priced as low as Click-On Price to Order $ 209.50

Note : Designed to fit the 1999-04 4.6L 2V With Pi Heads, also will work with 1996-98 4.6L 2V sith Pi heads.

Typhoon Throttle Body, Intake Plenum Kits Our TYPHOON Ugrade kit includes the intake, intake plenum, 75mm throttle body, stainless alternator bracket, stainless intake bolts, upper and lower intake gaskets, your choice of thermostats, and a set of NGK Tr6 Spark plugs. A Typhoon intake fits under stock Mustang hood, works with stock sensors, and is compatible with all stock and aftermarket air intake Kits. Best Of All! IT delivers 25 more horsepower than you cheap OEM plascic stock intake. Featuring : Satin Finish Typhoon Intake 75mm Satin Finish Throttle Body 75mm Satin Finish Intake Plenum 75mm Lower Intake Gasket Kit TR-6 Copper V-Power Spark Plugs 160º/180º Low-Temp Thermostat UPGRADE OPTION: *Add $75.00 for Polished Typhoon Intake, Throttle Body, Intake PLENUM Kit Dyno Proven Gains Of Up To: 25+ hp and 21+ lb-ft Torque Increase!   Part# RPM-460961-C priced as low as Click-On Price to Order $ 759.50