|
Simply mouseover and click on vehicle application or specific power option link for your vehicle.
|
 DYNO PROVEN KITS PROVIDE THE LARGEST POWER GAINS FOR YOUR 1996-04 MUSTANG GT/BULLETT
|
|
|
STRATEGY
In keeping with our goal of providing our customers with the best possible value, we have tested a large group of components specifically designed for your 1996-04 Mustang GT/Bullet.
We have invested many hours evaluating and refining each of the products on our chassis “dyno”, to ensure that we could develop as much power as possible, as safely as possible.
End result is our now available "Dyno Tuned Options".
Our site menu on the left side of this page, lists the clear winners when it comes to “performance vs. dollar” value. Please check back often as we are always developing new ways to create more horsepower.
| |
 |
|
CANTON ALUMINUM COOLANT EXPANSION / FILL TANK / POWER STEERING TANK
(1996-04 MUSTANG GT/2003-04 COBRA/MACH-1)
We are proud to announce the introduction of the newest additions of the Canton Racing Products S Series Aluminum model spicific tanks.
Back by popular demand are the Canton Racing Products new and improved S Series Aluminum Coolant Expansion tank, Supercharger Aluminum Coolant tank, and the Truck specific Power steering tank.
|
Installation of this tank is quite simple includes all of the special parts needed and should take no more than ½ hour to complete. |
ALUMINUM EXPANSION TANK
(uses factory stock vented cap)
1996-04 MUSTANG GT
2003-04 MUSTANG COBRA
CANTONS NEW S Series aluminum coolant expansion/fill tank is a direct bolt-in replacement. Exclusive Billet factory stock vented cap, bleeds pressure just like the factory plastic tank.
CANTONS NEW S Series aluminum coolant expansion/fill tank holds just under 1/2 additional gallon of fluid more than the stock tank.
Part# CAN80-232S $ 138.00
 
|
Installation of this tank is quite simple includes all of the special parts needed and should take no more than ½ hour to complete.
|
CANTON ALUMINUM
POWER STEERING TANK
This 1996-04 Mustang specific light weight power steering tank offers increased strength and an improved look over the factory tank. It is baffled for proper fluid control
and comes with the necessary brackets for installation in the factory position.
- 1996-04 MUSTANG GT
- 2003-04 MUSTANG COBRA
- 2003-04 MUSTANG MACH-1
Part# CAN77-232 $ 92.00
|
Installation of this tank is quite simple includes all of the special parts needed and should take no more than 5 minutes to complete. |
CANTON ALUMINUM BILLET RADIATOR CAP
(covers factory stock vented cap)
This high quality canton billet radiator cap cover is carved from solid billet aluminum. This simple but stylish look will brighten up your engine bay and enhance the look of your mustang when you show it off. Attaches with a stainless set screw so it's functional.
- 1996-09 MUSTANG GT
- 2007-09 SHELBY GT500
Part# CAN81-232 $ 30.00
|
GEN X Performance Radiator Hose Kit
Designed for use on 1996-04 Mustang GT 2V application
 |
MotoBlue Performance Radiator Hose Kit is exceptionally durable and resistant to pressure extremes.
Made from a premium EPDM rubber compound that protects against the high temperatures of full-throttle driving.
MotoBlue Performance Radiator Hose Kit will prolong the effectiveness of coolant because it is 10-15 times more resistant to water permeation than silicone hose. Upper and lower radiator hose included.
Features :
Upper Lower Radiator Hose KitMade from EPDM silicone rubber compound
P/N # MTB460156 $ 49.50
|
GEN X Water Pump Pulley
Designed for use with SHORT STYLE water pump
 |
Free Up Extra Horsepower with the MOTOBLUE™ 22% billet aluminum pulley!
Replace your factory high drag steel water pump pulley with a MOTOBLUE™ 22% under drive billet aluminum water
pump pulley. The MOTOBLUE™ Water pump pulley is designed to free up extra horsepower by reducing the amount of
water drag at high RPM’s, adds 4.2 HP and 6.1 Ft-Lb of torque. Installation time is 10 minuets, and is available for same day shipping.
Features :
Billet Aluminum underdrive pulley Adds 4.2 HP and 6.1 Ft-Lb of torque.
P/N # MTB460155 $ 40.00
|
|
|
1996-04 MUSTANGS
AIR COLD-AIR INTAKES
Cold-Air Intake Systems
GEN II FIPK® Cold-Air Intake
Cold-Air Kits
S&B Performance Cold-Air
Polished Billet Intake PLENUM
Typhoon Intake PLENUMS
PI Intake MANIFOLD
CNC Billet Shifters 
Hurst Comp/Billet/Plus Shifter
Alum. Coolant Tank
Silicone Radiator Hoses
160º/180º T-Stats
Methanol Injection Kits
Motor Oil / Gear Fluids
Line-Loc Brake Control
TRINITY T-1000
SPECIAL FORCES Software 
LIVEWIRE Device
3.73/4.10 Gears
Dual-Friction Kit
Street-Strip Clutch Kits
Auto. Trans. Control Unit
Camshafts/Spring Kits
Xtreme Camshaft Kits
STAGE 2/3 Heads
Race Balancer Kit
Mid-Length Header Kit
Mid-Length Headers
X-Pipe Kits
Stainless X-Pipe Kits
American Thunder Kits
Wideband air/fuel meter
GaugeWorks Pods
2 1/16' Gauges
Coil-on-plugs
Direct-Fire Coil-near-Plugs
Coil-near-Plugs
Copper/Iridium Plugs 
Performance Spark Plugs
Caster-Camber Control Kit
Tubular K-Member/Coil-Overs
Frame Connectors
Drag Radials / Slicks
